[1]张宇驰,刘淑莲,郭刚祥.基于Fluent的生物培养箱温度场分析[J].浙江科技学院学报,2021,(05):386-391.
 ZHANG Yuchi,LIU Shulian,GUO Gangxiang.Analysis of biological incubator temperature field based on Fluent[J].,2021,(05):386-391.
点击复制

基于Fluent的生物培养箱温度场分析(/HTML)
分享到:

《浙江科技学院学报》[ISSN:1001-3733/CN:61-1062/R]

卷:
期数:
2021年05期
页码:
386-391
栏目:
出版日期:
2021-10-31

文章信息/Info

Title:
Analysis of biological incubator temperature field based on Fluent
文章编号:
1671-8798(2021)05-0386-06
作者:
张宇驰刘淑莲郭刚祥
浙江科技学院 机械与能源工程学院,杭州 310023;浙江省计量科学院,杭州 310018
Author(s):
 ZHANG Yuchi LIU Shulian GUO Gangxiang
School of Mechanical and Energy Engineering, Zhejiang University of Science and Technology, Hangzhou 310023,Zhejiang, China; Zhejiang Academy of Metrology, Hangzhou 310018, Zhejiang, China
关键词:
生物培养箱数值模拟温度差
分类号:
TP391.9
文献标志码:
A
摘要:
温度是生物培养生长过程中的重要影响因素,为了研究培养箱温度均匀性情况,对培养箱内温度场进行分析。首先基于Fluent软件对培养箱内空气流动进行三维数值模拟,分别对有CO2检测模块、无CO2检测模块和CO2检测模块圆角化3种情况下的培养箱进行温度场仿真,然后对仿真所得结果进行分析。结果显示:无CO2检测模块温差小于有CO2检测模块;有CO2检测模块会使得总体温差有所增大;CO2检测模块圆角化后总体温度差减小,可以抵消有CO2检测模块带来的温差增大。因此CO2检测模块圆角化时温度场最均匀。3种培养箱结构的仿真分析结果为后续培养箱结构优化和研究提供了良好的技术支持。

相似文献/References:

[1]沙 毅,喻彩丽.自吸旋涡泵的试验研究[J].浙江科技学院学报,2010,(04):262.[doi:10.3969/j.issn.1671-8798.2010.04.005]
 SHA Yi,YU Cai-li.Experimental investigation of self-priming vortex pump[J].,2010,(05):262.[doi:10.3969/j.issn.1671-8798.2010.04.005]
[2]孙世保,韩豫,刘全坤,等.贯通内齿轮冷挤压成形工艺仿真与试验 [J].浙江科技学院学报,2009,(03):169.
 SUN Shi-bao,HAN Yu,LIU Quan-kun,et al.Simulation and experimental study on cold extrusion forming technology of hole-through internal gear[J].,2009,(05):169.
[3]李明哲,方明磊,刘 红.注塑工艺参数对塑料长尺残余应力的影响 [J].浙江科技学院学报,2009,(03):213.
 LI Ming-zhe,FANG Ming-lei,LIU Hong.Effect of injection parameters on residual stress of plastic long ruler[J].,2009,(05):213.
[4]朱广余,薛克敏,李 萍,等.铝合金框架压铸工艺数值模拟及分析 [J].浙江科技学院学报,2009,(03):220.
 ZHU Guang-yu,XUE Ke-min,LI Ping,et al.Numerical simulation and analysis of pressure casting technology on aluminium alloy frame[J].,2009,(05):220.
[5]管爱枝,施于庆,马红萍.基于拉深孔成形技术的杯形件拉深数值模拟 [J].浙江科技学院学报,2009,(03):234.
 GUANG Ai-zhi,SHI Yu-qing,MA Hong-ping.Numerical simulation of cup drawing based on drawing-hole forming technology[J].,2009,(05):234.
[6]唐 勇,薛克敏,李 萍,等.基于灰色理论的T形管内高压成形加载路径优化 [J].浙江科技学院学报,2009,(03):266.
 TANG Yong,XUE Ke-min,LI Ping,et al.Optimization for hydroforming loading paths of T-shaped tube based on grey system theory[J].,2009,(05):266.
[7]钦小平,阮世平.XY模型中涡旋数密度的Monte Carlo模拟[J].浙江科技学院学报,2012,(04):283.
 QIN Xiao-ping,RUAN Shi-ping.Monte Carlo simulation of vortex density in XY model[J].,2012,(05):283.
[8]庄 舰,柯春松,熊瑞斌,等.碳纤维复合材料周铣加工过程的数值模拟研究[J].浙江科技学院学报,2013,(05):345.
 ZHUANG Jian,KE Chunsong,XIONG Ruibin,et al.Numerical simulation of drilling for carbon fiber composite materials[J].,2013,(05):345.
[9]吉 辰,胡桂林.装配压力对PEMFC气体扩散层影响的研究[J].浙江科技学院学报,2017,(01):11.
 JI Chen,HU Guilin.Study on effects of assembly pressures on the gas diffusion layer for proton exchange membrane fuel cell[J].,2017,(05):11.
[10]李其朋,吴海军,周素华,等.桶灌室CS2气体连续泄漏扩散的三维数值模拟[J].浙江科技学院学报,2018,(03):205.
 LI Qipeng,WU Haijun,ZHOU Suhua,et al.Three dimensional numerical simulation of CS2 gas continuous leakage and diffusion in a bucket chamber[J].,2018,(05):205.

更新日期/Last Update: