[1]王勤生.模具压力中心测定装置的研究 [J].浙江科技学院学报,2003,(04):210-213.
 WANG Qin-sheng.Research on testing device of the pressure center of mould[J].,2003,(04):210-213.
点击复制

模具压力中心测定装置的研究

()
分享到:

《浙江科技学院学报》[ISSN:1001-3733/CN:61-1062/R]

卷:
期数:
2003年04期
页码:
210-213
栏目:
自然科学技术研究
出版日期:
2003-12-30

文章信息/Info

Title:
Research on testing device of the pressure center of mould
文章编号:
1671-8798(2003)04-0210-04
作者:
王勤生
浙江科技学院 机电工程学系,浙江,杭州,310012
Author(s):
WANG Qin-sheng
关键词:
模具压力中心应变测量装置
分类号:
TG385.2;TG806
文献标志码:
A
摘要:
提出用应变测量法测定冲压模具的冲压力和压力中心的位置,以替代目前常用的经验概算法,从而提高模具的寿命、冲压件质量及设备利用率等.

相似文献/References:

[1]施于庆.密封窗多对斜楔结构设计及参数的确定[J].浙江科技学院学报,1999,(0102合刊):30.
 Shi Yu-qing.Designing of Many Pair Oblique Plane Die of Hermetically Sealed Window and calculating of parameter[J].,1999,(04):30.
[2]施于庆.滤清器支架对称压制及模具设计[J].浙江科技学院学报,2015,(06):500.
 SHI Yuqing.Symmetry pressing of filterholder and die design[J].,2015,(04):500.
[3]施于庆.高盒形件拉深计算及坯料展开方法[J].浙江科技学院学报,2017,(01):7.
 SHI Yuqing.Calculation of deep drawing in high box shaped parts and blank unfolding method[J].,2017,(04):7.
[4]施于庆.非规则冲压件的压力中心计算[J].浙江科技学院学报,2018,(05):375.
 Pressure center calculation of irregular stamping parts[J].,2018,(04):375.

更新日期/Last Update: