[1]朱广余,薛克敏,李 萍,等.铝合金框架压铸工艺数值模拟及分析 [J].浙江科技学院学报,2009,(03):220-223.
 ZHU Guang-yu,XUE Ke-min,LI Ping,et al.Numerical simulation and analysis of pressure casting technology on aluminium alloy frame[J].,2009,(03):220-223.
点击复制

铝合金框架压铸工艺数值模拟及分析

()
分享到:

《浙江科技学院学报》[ISSN:1001-3733/CN:61-1062/R]

卷:
期数:
2009年03期
页码:
220-223
栏目:
自然科学技术研究
出版日期:
2009-09-30

文章信息/Info

Title:
Numerical simulation and analysis of pressure casting technology on aluminium alloy frame
文章编号:
1671-8798(2009)03-0220-04
作者:
朱广余薛克敏李 萍薛传妹
合肥工业大学 材料科学与工程学院,合肥 230009
Author(s):
ZHU Guang-yuXUE Ke-minLI PingXUE Chuan-mei
关键词:
压力铸造数值模拟缩松缩孔显现概率
分类号:
TG249.2
文献标志码:
A
摘要:
通过应用多种软件交换和数据接口技术,设计了正交实验以完成压铸过程数值模拟。结果表明:通过设置合理浇注系统、控制压铸速度和提高模具预热温度,可以有效减少铸件缩松缩孔;各参数对铸件缩松缩孔发生概率影响程度从大到小依次为浇注系统方式、模具预热温度、压铸速度;理想工艺方案为浇注系统a、压铸速度1 m/s、模具预热温度450℃。

相似文献/References:

[1]沙 毅,喻彩丽.自吸旋涡泵的试验研究[J].浙江科技学院学报,2010,(04):262.[doi:10.3969/j.issn.1671-8798.2010.04.005]
 SHA Yi,YU Cai-li.Experimental investigation of self-priming vortex pump[J].,2010,(03):262.[doi:10.3969/j.issn.1671-8798.2010.04.005]
[2]孙世保,韩豫,刘全坤,等.贯通内齿轮冷挤压成形工艺仿真与试验 [J].浙江科技学院学报,2009,(03):169.
 SUN Shi-bao,HAN Yu,LIU Quan-kun,et al.Simulation and experimental study on cold extrusion forming technology of hole-through internal gear[J].,2009,(03):169.
[3]李明哲,方明磊,刘 红.注塑工艺参数对塑料长尺残余应力的影响 [J].浙江科技学院学报,2009,(03):213.
 LI Ming-zhe,FANG Ming-lei,LIU Hong.Effect of injection parameters on residual stress of plastic long ruler[J].,2009,(03):213.
[4]管爱枝,施于庆,马红萍.基于拉深孔成形技术的杯形件拉深数值模拟 [J].浙江科技学院学报,2009,(03):234.
 GUANG Ai-zhi,SHI Yu-qing,MA Hong-ping.Numerical simulation of cup drawing based on drawing-hole forming technology[J].,2009,(03):234.
[5]唐 勇,薛克敏,李 萍,等.基于灰色理论的T形管内高压成形加载路径优化 [J].浙江科技学院学报,2009,(03):266.
 TANG Yong,XUE Ke-min,LI Ping,et al.Optimization for hydroforming loading paths of T-shaped tube based on grey system theory[J].,2009,(03):266.
[6]钦小平,阮世平.XY模型中涡旋数密度的Monte Carlo模拟[J].浙江科技学院学报,2012,(04):283.
 QIN Xiao-ping,RUAN Shi-ping.Monte Carlo simulation of vortex density in XY model[J].,2012,(03):283.
[7]庄 舰,柯春松,熊瑞斌,等.碳纤维复合材料周铣加工过程的数值模拟研究[J].浙江科技学院学报,2013,(05):345.
 ZHUANG Jian,KE Chunsong,XIONG Ruibin,et al.Numerical simulation of drilling for carbon fiber composite materials[J].,2013,(03):345.
[8]吉 辰,胡桂林.装配压力对PEMFC气体扩散层影响的研究[J].浙江科技学院学报,2017,(01):11.
 JI Chen,HU Guilin.Study on effects of assembly pressures on the gas diffusion layer for proton exchange membrane fuel cell[J].,2017,(03):11.
[9]李其朋,吴海军,周素华,等.桶灌室CS2气体连续泄漏扩散的三维数值模拟[J].浙江科技学院学报,2018,(03):205.
 LI Qipeng,WU Haijun,ZHOU Suhua,et al.Three dimensional numerical simulation of CS2 gas continuous leakage and diffusion in a bucket chamber[J].,2018,(03):205.
[10]李春蓄,沙毅,胡雅文.包角对中转速比离心泵流场及压力脉动的影响[J].浙江科技学院学报,2021,(03):191.
 LI Chunxu,SHA Yi,HU Yawen.Influence of blade wrap angle on flow field and pressure pulsation of medium specific speed centrifugal pump[J].,2021,(03):191.

更新日期/Last Update: