相似文献/References:
[1]沙 毅,喻彩丽.自吸旋涡泵的试验研究[J].浙江科技大学学报,2010,(04):262.[doi:10.3969/j.issn.1671-8798.2010.04.005]
SHA Yi,YU Cai-li.Experimental investigation of self-priming vortex pump[J].,2010,(04):262.[doi:10.3969/j.issn.1671-8798.2010.04.005]
[2]孙世保,韩豫,刘全坤,等.贯通内齿轮冷挤压成形工艺仿真与试验 [J].浙江科技大学学报,2009,(03):169.
SUN Shi-bao,HAN Yu,LIU Quan-kun,et al.Simulation and experimental study on cold extrusion forming technology of hole-through internal gear[J].,2009,(04):169.
[3]李明哲,方明磊,刘 红.注塑工艺参数对塑料长尺残余应力的影响 [J].浙江科技大学学报,2009,(03):213.
LI Ming-zhe,FANG Ming-lei,LIU Hong.Effect of injection parameters on residual stress of plastic long ruler[J].,2009,(04):213.
[4]朱广余,薛克敏,李 萍,等.铝合金框架压铸工艺数值模拟及分析 [J].浙江科技大学学报,2009,(03):220.
ZHU Guang-yu,XUE Ke-min,LI Ping,et al.Numerical simulation and analysis of pressure casting technology on aluminium alloy frame[J].,2009,(04):220.
[5]管爱枝,施于庆,马红萍.基于拉深孔成形技术的杯形件拉深数值模拟 [J].浙江科技大学学报,2009,(03):234.
GUANG Ai-zhi,SHI Yu-qing,MA Hong-ping.Numerical simulation of cup drawing based on drawing-hole forming technology[J].,2009,(04):234.
[6]唐 勇,薛克敏,李 萍,等.基于灰色理论的T形管内高压成形加载路径优化 [J].浙江科技大学学报,2009,(03):266.
TANG Yong,XUE Ke-min,LI Ping,et al.Optimization for hydroforming loading paths of T-shaped tube based on grey system theory[J].,2009,(04):266.
[7]庄 舰,柯春松,熊瑞斌,等.碳纤维复合材料周铣加工过程的数值模拟研究[J].浙江科技大学学报,2013,(05):345.
ZHUANG Jian,KE Chunsong,XIONG Ruibin,et al.Numerical simulation of drilling for carbon fiber composite materials[J].,2013,(04):345.
[8]吉 辰,胡桂林.装配压力对PEMFC气体扩散层影响的研究[J].浙江科技大学学报,2017,(01):11.
JI Chen,HU Guilin.Study on effects of assembly pressures on the gas diffusion layer for proton exchange membrane fuel cell[J].,2017,(04):11.
[9]李其朋,吴海军,周素华,等.桶灌室CS2气体连续泄漏扩散的三维数值模拟[J].浙江科技大学学报,2018,(03):205.
LI Qipeng,WU Haijun,ZHOU Suhua,et al.Three dimensional numerical simulation of CS2 gas continuous leakage and diffusion in a bucket chamber[J].,2018,(04):205.
[10]李春蓄,沙毅,胡雅文.包角对中转速比离心泵流场及压力脉动的影响[J].浙江科技大学学报,2021,(03):191.
LI Chunxu,SHA Yi,HU Yawen.Influence of blade wrap angle on flow field and pressure pulsation of medium specific speed centrifugal pump[J].,2021,(04):191.